Linear-Mech® ATL and BSA - Robust and reliable linear actuators
Robust, reliable, complete with motor
These linear actuators for industrial use are suitable for low to medium loads with strokes of up to 800 mm. The rated linear speeds range up to 150 mm/s. The motors are either DC 24 V (12 and 36 V also available) or AC, either 1-phase or 3-phase. Stroke lengths are normally supplied in standard increments of 100 mm, starting at 100 mm.
The ATL models with ACME thread are robust and designed for a duty of up to 30 % over a period of 10 minutes. Stroke limit switches can be specified which are fitted to the outside of the outer tube. These models cannot normally be back driven.
The BSA models with ball screw have a higher efficiency and can be operated up to 100 %. In terms of dimensions, they are similar to the ATL models. Because of their higher efficieny back driving is possible and brake motors are usually installed.
They are an excellent alternative to pneumatic cylinders in medium to low speed, intermittent duty cycle applications. They hold the position under load in tension or compression.
Features of the ATL Linearmech series
- 5 standard sizes with trapezoidal spindle
- Trapezoidal spindle from Ø 13.5 mm up to Ø 18 mm
- Linear lifting speed up to 150 mm/s
- Dynamic tensile and compressive load up to 11,000 N
- AC 3-phase or 1-phase motors, DC 12 or 24V
- Lubricated for life, maintenance-free
Features of the BSA Linearmech series
- 4 standard sizes with recirculating ball screw
- Ball screw from Ø 14 mm up to Ø 20 mm
- Linear lifting speed up to 125 mm/s
- Dynamic tensile and compressive load up to 9,000 N
- AC 3-phase or 1-phase motors, DC 12 or 24V
- Lubricated for life, maintenance-free
