![](/fileadmin/_processed_/4/2/csm_Header_Mech_Spannsatz_Nicht_selbstzentr_1120x500_en_184609d05c.webp)
Mechanical clamping sets, internal clamping set – non-self-centring
Non-self-centring: For these designs, a centring between shaft and hub is required.
During installation (tightening of the axial clamping screws), no axial offset of the hub occurs due to the design.
- Standard versions for shaft diameters from 6 mm to 800 mm
- Standard versions for torques from 2 to 2,130,000 Nm
The product pages contain additional technical details and catalogues.