PowerGrip® TwinPower® toothed belt
Double toothing for high load capacity
With their double and directly opposing toothing, Twin Power® synchronous belts ensure a high load capacity with opposing drives – they ensure smooth operation and a high level of flexibility. They are available both with the classic trapezoidal teeth profile as well as with the unique GT teeth profile. A Twin Power® GT2 belt has double the transmission power of a Twin Power® HTD® belt. It is characterised by an extraordinary load capacity and a high resistance to tooth jumping, which guarantees a slip-free drive with good tooth engagement. Furthermore, the belt also runs with very low noise. The Twin Power® is available in the pitches PowerGrip® GT2 8MGT and 14MGT, HTD® 5M and PowerGrip® XL, L and H.
Highlights
- High transmission capacity (from both sides)
- Slip-free, safe drive
- High flexibility and smooth running
- Tough nylon coating as wear protection
- Lubrication- and maintenance-free
Design
With a similar design as the classic PowerGrip® synchronous and PowerGrip® GT2 belts. Tough fibreglass tensile cord, precision-moulded elastomer teeth and bodies. Wear-resistant nylon fabric on both tooth sides.
Temperature range:
- -30 to +100 °C
Profiles and dimensions
| Profile | Tooth pitch | Collar width (mm) | Tooth height (mm) | Length range (Pitch length - mm) |
|---|---|---|---|---|
| Twin Power® PowerGrip® GT2 | ||||
| 8MGT | 8.0 mm | 2.00 | 3.40 | 480 - 4,960 |
| 14MGT | 14.0 mm | 3.70 | 5.82 | 1,610 - 6,860 |
| Twin Power® PowerGrip® - metric | ||||
| 5M | 5.0 mm | 1.5 | 2.1 | 425 - 2,525 |
| Twin Power® PowerGrip® - imperial | ||||
| XL | 1/5" (0.200") | 0.508 | 1.27 | 381 - 894 |
| L | 3/8" (0.375") | 0.762 | 1.91 | 514 - 1,676 |
| H | 1/2" (0.500") | 1.372 | 2.29 | 609 - 4,318 |
Application area
- Machines with a serpentine drive
